HYGROSMART S-10 RAPID REPAIR PLASTER
HYGROSMART S-10 RAPID REPAIR PLASTER
Άμεσα Διαθέσιμο. Παράδοση σε 1-3 Ημέρες
Regular price
€4,50 EUR
Regular price
Sale price
€4,50 EUR
Unit price
per
Taxes included.
Shipping calculated at checkout.
PREPARATION OF SURFACES:
APPLICATION:
- The substrate should be solid, clean, free of loose elements, dust, oil, grease or paint.
- During the warm months, the substrate should be wet before application in order to have a gradual and smooth drying of the material.
- If there are exposed iron fittings, they should be thoroughly cleaned of rust and coated with a special anti-rust mortar - anti-rust paint.
APPLICATION:
- Mix 5.5-6 liters of clean water with 25 kg ( 0.200 gr/1kg ) and mix with a mechanical mixer at low speed until a homogeneous slurry without lumps is obtained. The mixture is ready to use.
- Wet the substrate thoroughly and apply with a trowel or trowel. For repairs thicker than 15 mm HS-180R is applied in multiple layers. The pot life of the mixture is about 90 minutes.
- As soon as the mortar starts to dry, we rub for smoothing with a taco made of expanded polystyrene or a sponge or a trowel depending on the final surface we want to achieve.
- Days with high temperatures or dry air to avoid premature drying of the material keep it moist by sprinkling it with water.
- Protect it from rain and frost for at least 10 hours.
- The final finish can be done with putty putty for interior and exterior spaces.

